• Material Weights Harmony Sand & Gravel

    Most of Harmony Sand & Gravel’s products will weight approximately 2,840 pounds per cubic yard or about 1.42 tons per cubic yard. For estimating purposes, most Contractor’s consider the yield to be 3,000 pounds per cubic yard or 1.5 tons per cubic yard.

  • Calculate 1A Limestone Dust Limerock cubic yards Tons

    Type in inches and feet of your project and calculate the estimated amount of Sand Screenings in cubic yards, cubic feet and Tons, that your need for your project. The Density of 1A Limestone Dust Limerock: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t

  • Construction Aggregate Calculator Vulcan Materials Company

    Length: Feet; Thickness: Density*: *Density Estimator. Instructions: If you do not know the actual density, select the type of geology and product from the lists below and hit the “Estimate Density” button. An estimated density factor should then appear in the above density field.

  • How Much Does a Cubic Foot of Dirt Weigh? Dirt Connections

    Aug 06, 2019· There are 27 cubic feet in a cubic yard, so if you divide 2000 by 27, that comes out to 74.07lbs (0.037 tons). No matter how much cubic feet of fill dirt you need, it is going to weigh a lot. We recommend investing in a good wheelbarrow.

  • 4.5/5(40)
  • Approximate Weights of Various Construction Material Per

    Apr 04, 2015· Most gravel products will weight approximately 2,840 pounds per cubic yard or about 1.42 tons per cubic yard. For most estimating purposes, consider the yield to be 3,000 pounds per cubic yard or 1.5 tons per cubic yard.

  • How much does it weigh: Rocks and gravel Western

    Length and width will get you approximate surface area. Then consider how deep the material is. If you’re working in feet remember that 1 cubic yard is equal to 27 cubic feet. If you have 3 foot by 9 foot area that is 1 foot deep you will have 1 cubic yard of material. 3ft (length) x 9ft (width) x 1ft (depth) = 27 cubic feet = 1 cubic yard

  • Stone, crushed volume to weight conversion

    Stone, crushed weighs 1.602 gram per cubic centimeter or 1 602 kilogram per cubic meter, i.e. density of stone, crushed is equal to 1 602 kg/m³. In Imperial or US customary measurement system, the density is equal to 100 pound per cubic foot [lb/ft³], or 0.926 ounce per cubic inch [oz/inch³].

  • Bulk Material Calculator Contractors Stone Supply

    How much does a cubic yard weigh? Most of our bulk materials, with the exception of mulch, are sold by the weight. The following are approximate weights for most of our bulk materials. Sand 1.10 1.25 tons(2,200 2,500 lb.) per cubic yard Planting Mix 1 ton (2,000 lb.) per cubic yard Lawn Dressing .90 tons (1,800 lb.) per cubic yard

  • Calculating How Much Stone Dust You Need

    If your number comes out as a fraction, and it probably will, round up. Stone dust, sand, and other base materials are usually sold in 0.5 cubic yard increments. So here you would round the 1.19 cubic yards to 1.5 cubic yards of sand or stone dust. It is better to have a little extra than to run short and have to pause your project to order more.

  • Calculate 1A Limestone Dust Limerock cubic yards Tons

    Type in inches and feet of your project and calculate the estimated amount of Sand Screenings in cubic yards, cubic feet and Tons, that your need for your project. The Density of 1A Limestone Dust Limerock: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t

  • Volume-to-Weight Conversion Charts

    Quartz, solid 1 cubic foot 165.00 0.083 FEECO Rock, loose 1 cubic yard 2,570.00 1.285 Tellus Institute Rock, soft 1 cubic foot 105.00 0.053 FEECO Sand, dry 1 cubic foot 100 0.050 FEECO Sand, loose 1 cubic yard 2,441.00 1.221 Tellus Institute Sand, moist 1 cubic foot 105.00 0.053 FEECO Sand, wet 1 cubic foot 120.00 0.060 FEECO

  • Reade Advanced Materials Weight Per Cubic Foot And

    Particle Briefings from READE: Weight Per Cubic Foot And Specific Gravity (Typical) of metals, minerals, ceramics, and organics.

  • Construction Aggregate Calculator Vulcan Materials Company

    Length: Feet; Thickness: Density*: *Density Estimator. Instructions: If you do not know the actual density, select the type of geology and product from the lists below and hit the “Estimate Density” button. An estimated density factor should then appear in the above density field.

  • Lumber and Hardwood Weight Calculator Inch Calculator

    This will get the volume in cubic inches. Divide the volume in cubic inches by 1,728 to find the volume in cubic feet. Out cubic inches to cubic feet conversion utility can help with this. Find Weight of Wood. After you have the density and the volume, multiply them together to find the total weight.

  • How much does it weigh: Rocks and gravel Western

    Length and width will get you approximate surface area. Then consider how deep the material is. If you’re working in feet remember that 1 cubic yard is equal to 27 cubic feet. If you have 3 foot by 9 foot area that is 1 foot deep you will have 1 cubic yard of material. 3ft (length) x 9ft (width) x 1ft (depth) = 27 cubic feet = 1 cubic yard

  • Volume-to-Weight Conversion Charts

    Quartz, solid 1 cubic foot 165.00 0.083 FEECO Rock, loose 1 cubic yard 2,570.00 1.285 Tellus Institute Rock, soft 1 cubic foot 105.00 0.053 FEECO Sand, dry 1 cubic foot 100 0.050 FEECO Sand, loose 1 cubic yard 2,441.00 1.221 Tellus Institute Sand, moist 1 cubic foot 105.00 0.053 FEECO Sand, wet 1 cubic foot 120.00 0.060 FEECO

  • Approximate Weights of Various Construction Material Per

    Apr 04, 2015· Most gravel products will weight approximately 2,840 pounds per cubic yard or about 1.42 tons per cubic yard. For most estimating purposes, consider the yield to be 3,000 pounds per cubic yard or 1.5 tons per cubic yard.

  • NCPTT Calculating the Weight of Stone

    Nov 07, 2013· Step 2: Calculating the weight of the stone In this step you will be using the cubic feet you obtained from doing step 1 to calculate the approximate weight of the stone. You will need a calculator, pencil, and paper to do this. Now that you have your cubic feet written down all you need to do is use the chart below.

  • Construction Aggregate Calculator Vulcan Materials Company

    Length: Feet; Thickness: Density*: *Density Estimator. Instructions: If you do not know the actual density, select the type of geology and product from the lists below and hit the “Estimate Density” button. An estimated density factor should then appear in the above density field.

  • Calculating gravel tonnage, cubes, and sand and earth.

    The densities (pounds per square foot, or tons per cubic yard, sometimes called "pounds per foot" or "tons per cube") will also vary according to the season, the saturation levels (dampness) of the piles of medium when you purchase the mediums, the quality of the

  • Cubic Yard Calculator Gravel Yardage Calculator Nimbus

    If you want to haul these materials in your own truck, you need to know the weight per ton and the capacity of your truck. As a general rule of thumb, small trucks (1/2 ton) can haul a half yard of gravels and soil or a yard of bark. Large pick-up trucks (3/4 and 1 ton) can haul one yard of heavy material or a couple of yards of bark.

  • Weight Of Crushed Rock Per Cubic Foot

    How Much Does A Cubic Yard Of Crushed Rock Weigh. Standard Weights for Crushed Rock Per Meter Hunker. Crushed aggregate, one-inch crushed concrete, recycled asphalt, 38-inch pea gravel, 2-inch sewer filter rock, and concrete and asphalt aggregate blends all weigh in at 1.07 tons.

  • Sulphur, pulverized volume to weight conversion

    About Sulphur, pulverized; 1 cubic meter of Sulphur, pulverized weighs 961 kilograms [kg] 1 cubic foot of Sulphur, pulverized weighs 59.99327 pounds [lbs] Sulphur, pulverized weighs 0.961 gram per cubic centimeter or 961 kilogram per cubic meter, i.e. density of sulphur, pulverized is equal to 961 kg/m³.In Imperial or US customary measurement system, the density is equal to 60 pound per cubic

  • How much does one cubic foot of rock weigh? Answers

    Granite weighs approximately 165 pounds per cubic foot. Sandstone weighs approximately 155 pounds per cubic foot. Factors that affect this weight include the size of the rocks and the type of rock.

  • How to Use Fertilizers-Rock Dust Organic Gardening Blog

    Top dress it in your garden, potted plants, or raised beds. Use 2 1/2 lbs per 100 square feet of garden, or 1 Tbsp per gallon of soil or potting mix. Sprinkle around the plants and gently rake it into the surface. Reapply as needed, or up to once a month. Basalt Rock Dust Basalt Rock Dust is made of the volcanic rock called basalt.

  • Morrison Gravel Calculation

    We're More Than Just Gravel! 1004 SE Spencer Ave Port Orchard,WA Phone: (360) 876-4701

  • Free material calculater for boulder weights and coverage

    1' to 2' boulders = 25 boulders per ton 2' to 3' boulders = 4 to 6 boulders per ton 3' to 4' boulders = 1 to 2 boulders per ton 4' to 5' boulders = 1 boulder per ton CALCULATE A CUBIC YARD: length x width x depth---divided by 27 = the cubic yard (use .5 for 6 inch measurements) 1 YARD COVERS A AREA AT: 2" deep--162 square feet

  • CUBIC YARDAGE CALC SHEET SwapLoader

    Material Weight Pounds per Cubic Yard Asphalt 2,700 lb. Iron (wrought) 13,100 lb. Brush/Branches (loose) 250 lb. Leaves (loose, dry) 150 lb. Brush/Branches (chipped 3” screen) 600 lb. Leaves (vacuumed, dry) 400 lb. Concrete (gravel or stone mix) 4,050 lb. Leaves (wet or compacted) 550 lb.

  • Gravel Calculator Estimate Landscaping Material in Yards

    Step Two: Calculate Weight in Tons. Armed with the volume of material needed in cubic yards, the weight of material in tons can be found by multiplying the volume by the material density. Most gravel weighs 1.4 to 1.7 tons per cubic yard. See below for more common material densities.